TYGRIS Anti-Static Foaming Cleaner is designed for use around the workplace where the build up of dust is undesirable, its anti static properties dissipating static electrical charges effectively. For use on all water resistant, non porous surfaces, the foaming action aids in clinging to vertical surfaces.

Benefits:

• Dissolves grease and grime;
• Foaming action for use on vertical surfaces;
• Minimises wetting on fabrics;
• Residual anti static effect;
• For use on most surfaces including plastics;
• Streak free finish;
• Lemon fragrance

Consult the safety data sheet prior to use – suitable Personal Protection Equipment should be worn. Shake can well before use. Spray onto hard surfaces from a distance or 25 to 30cm. Allow foam to develop and wipe with a clean cloth. For porous surfaces, apply as above, allow foam to develop and remove with a damp sponge or cloth, working into the centre to prevent risk of ring formation. Dispose of used aerosols in line with local and national regulations.

*Image for illustrative purposes only

Moisturising hand protection with bactericide

Tygris R250 is a high quality water based blend of skin-care ingredients used to protect hands from industrial soiling. Contains conditioners, humectants and emollients to retain skin freshness and replenish moisture, and an anti-microbial agent to protectagainst infection. Use before and after work for maximum effect.

Benefits

• Protects against dilute acids – alkalis – paints – resins – epoxies – plastics – inks – tars and petroleum solvents
• Non-greasy
• Guards against skin cracking – irritation and infection
• with a pleasant perfume
• Incorporates bactericide
• Easily removed with soap and water
• Sprays on as a foam which collapses for maximum penetration

*Image for illustrative purposes only

TYGRIS Battery Terminal Protector is an easily applied fine film spray which protects battery terminals by sealing them from air and moisture, prolonging battery life and increasing its efficiency. Corrosive deposits are prevented from building up and the coating contains a pH indicator to detect the incidence of leaks.

Benefits:

• Easily applied spray;
• Protects battery terminals from deterioration;
• Prolongs battery life;
• Increases starting efficiency;
• pH indicator dye detects battery acid leakage and turns from orange to red;
• Dries to a thick non-slumping grease;
• Water repellent

Consult the safety data sheet prior to use – suitable Personal Protection Equipment should be worn. Shake can well and apply only to battery terminals and clamps, ensuring an even film is applied. Dispose of used aerosols in line with local and national regulations.

*Image for illustrative purposes only

TYGRIS Brake Cleaner is a powerful cleaning fluid used to remove oil, grease, dirt and dust from brakes and clutches, aiding in the elimination of brake squeal and clutch slip caused by glazing and contamination. Can be used on many other surfaces as a powerful brake cleaning fluid

Benefits:

• Colourless – non-staining;
• Fast evaporating solvents;
• Effective against grease – brake fluid – brake and clutch dust;
• Can be used to remove tar spots from some surfaces;
• Eliminates brake squeal and clutch slip

Consult the safety data sheet prior to use – suitable Personal Protection Equipment should be worn. Spray liberally on surface to be cleaned. Wipe off with an absorbent cloth. Test brake operation after cleaning if applicable. May affect some painted surfaces – test on an inconspicuous area first. Avoid spraying on hot surfaces or near naked flames. Always dispose of contaminated materials in a sealable container to avoid fire risk. Not suitable for use on plastic or rubber components. Dispose of used aerosols in line with local and national regulations.

*Image for illustrative purposes only

TYGRIS Carburettor Cleaner is a strong solvent based cleaner used for the removal of oil, grease and stubborn gum deposits from carburettors and injection systems. Suitable also for cleaning brake parts and automatic chokes without dismantling in order to prevent stalling and to smooth out rough idling.

Benefits:

• Strong solvent for stubborn deposits;
• Dissolves grease and oil;
• Helps to restore engine performance;
• Removes combustion deposits from nail gun mechanisms;
• Safe for use with catalytic convertors and oxygen sensors

Consult the safety data sheet prior to use – suitable Personal Protection Equipment should be worn. Spray on cleaner and wipe off dirt with an absorbent cloth. For stubborn deposits, leave solvent a short while to work in, then wipe off. When cleaning carburettors in situ, remove air filter, spray a little cleaner onto external linkages, run engine at half throttle, spray cleaner into air intake until engine starts to stall, then re-fit the air filter. Dispose of used aerosols in line with local and national regulations.

*Image for illustrative purposes only

TYGRIS Chain & Wire Rope Lubricant is a heavy duty, molybdenum disulphide reinforced lubricant which penetrates deeply into drive chains and wire ropes to give long lasting lubrication, preventing corrosion, wear and chain elongation. It gives outstanding performance under extreme load and is resistant to fling off.

Benefits:

• Use on chain blocks – drive chains – fork lift chains and wire ropes;
• Extreme pressure additives for heavy loads;
• Excellent lubrication properties;
• Resistant to flinging off;
• Penetrates deeply;
• Only a thin film is left on the surface for corrosion prevention;
• High resistance to wash off

Consult the safety data sheet prior to use – suitable Personal Protection Equipment should be worn. Shake can well before use. Spray onto surface to be treated from 15-30cm, allow to penetrate and wipe off excess with a cloth. After use, invert can and spray to clear nozzle. Dispose of used aerosols in line with local and national regulations.

*Image for illustrative purposes only

PRECISION Clear Forklift Chain Lubricant is a premium-grade oil based product that gives clear lubrication to chains and other moving parts where a dark coloured lubricant would be undesirable. Its anti-fling properties make it very effective when used on moving parts, penetrating into the mechanism and depositing a film of extreme pressure additives which will withstand pressure washing.

Benefits:

• Clear, non-staining lubricant;
• Extreme pressure additives for heavy use;
• Effective on fork lift chains – sprockets – pins and bushes;
• Tenacious – will not fling off;
• Penetrates deeply;
• Withstands pressure washing;

Consult the safety data sheet prior to use – suitable Personal Protection Equipment should be worn. Shake can well. Spray onto chain mechanism from 10-20cm, allow a few seconds for the lubricant to penetrate and for the solvent to flash off. Use a clean cloth to wipe off any overspray as necessary. Dispose of used aerosols in line with local and national regulations.

*Image for illustrative purposes only

TYGRIS Clear Grease is used on chains and moving metal parts. This high performance grease penetrates rapidly before thickening to a tenacious grease which is highly resistant to throw off. The addition of extreme pressure additives makes it particularly effective under heavy loads.

Benefits:

• Clear and non-staining;
• Penetrates rapidly and thickens;
• Highly resistant to throw-off;
• Extreme pressure additives for high loadings;
• Use on chains and other moving parts

Consult the safety data sheet prior to use – suitable Personal Protection Equipment should be worn. Shake can well before use and spray from a distance of 15-30cm. Dispose of used aerosols in line with local and national regulations.

*Image for illustrative purposes only

TYGRIS Clear Penetrating Oil is a clear low-viscosity oil based product used to aid the freeing of seized nuts and bolts, hinges, locks, tools and fittings with a fast penetrating capillary action. Leaves a clear protective film to guard against further corrosion.

Benefits:

• Low viscosity for maximum penetration;
• Easy to apply and works quickly;
• Leaves a protective film against corrosion;
• Also suitable for light lubrication duties;
• De-watering capability

Consult the safety data sheet prior to use – suitable Personal Protection Equipment should be worn. Shake can well before use. Spray onto part from 15-30cm and allow to penetrate for a few moments. Dispose of used aerosols in line with local and national regulations.

*Image for illustrative purposes only

TYGRIS Clear Polymer Chain Lubricant is for use on chains and sprockets, pins and bushes where its anti-fling performance is important and where a clear invisible film is necessary for cosmetic reasons. It penetrates into the chain, depositing a film of extreme pressure additives and polymers which will withstand pressure washing.

Benefits:

• Fortified with PTFE for improved load resistance;
• Good thermal stability;
• Extreme pressure additives;
• Will not fling off; Extends chain life;
• Resists and prevents corrosion;
• Clean to use;
• Penetrates deep into chain links;
• Withstands pressure cleaning

Consult the safety data sheet prior to use – suitable Personal Protection Equipment should be worn. Shake can well. Spray onto surface from 10-20cm, allow a few seconds for the solvent to disperse and re-start machinery. Dispose of used aerosols in line with local and national regulations.

*Image for illustrative purposes only

TYGRIS Copper A-S Advanced is an anti-sieze compound which gives outstanding overall metal protection against heat, rust, seizure and corrosion. Resistance to water and acids is high and it will not burn off under extreme stress. For use on threaded components, pins, valve stems in a range of materials including austenitic stainless steel. Used on brake callipers and the back of brake pads it will help eliminate brake squeal.

Benefits:

• Effective up to 1100°C;
• Water and acid resistant;
• Use on a wide range of metals;
• Prevents seizure of threaded parts;
• Will not burn or wash off;
• Eliminates brake squeal;
• Assists in assembly and disassembly of components

Consult the safety data sheet prior to use – suitable Personal Protection Equipment should be worn. Shake can well before use. Spray component from a distance of 15 to 30cm. Wipe off excess. Do not apply to friction materials and pads. Dispose of used aerosols in line with local and national regulations.

*Image for illustrative purposes only

TYGRIS Cutting & Tapping Fluid is a ready to use specially formulated fluid to improve tool performance and extend tool life. It contains additives to prevent pitting, galling and metal seizure and is suitable for use on hard to work metals including stainless steel, titanium, aluminium and tool steel.

Benefits:

• For cutting and tapping – reaming and turning;
• Extreme pressure additives for difficult materials;
• High pressure foaming discharge to aid penetration;
• Prolongs tool life and improves machined finish;
• Reduces heat build up;
• Suitable for use on all metals;
• Incorporates corrosion inhibitors

Consult the safety data sheet prior to use – suitable Personal Protection Equipment should be worn. Shake can well before use. Spray tool area to be treated. Repeat if necessary. Do not spray onto very hot surfaces or near naked flames. Dispose of used aerosols in line with local and national regulations.

*Image for illustrative purposes only

TYGRIS Dashboard Cleaner (Non-Silicone) is a light duty, perfumed cleaner and polish for internal plastic, wood and veneered trim in automotive applications. It cleans as well as shines dashboards, fascias, and other interior panels, restoring to original appearance without the need for manual buffing. It is fast acting with nearly instantaneous evaporation and being silicone free can be used in areas where painting and re-finishing takes place.

Benefits:

• Silicone free for use in areas where re-finishing takes place;
• Easy to use – no buffing required;
• Restores original appearance;
• Fast acting and fast evaporation;
• Pleasant fragrance

Consult the safety data sheet prior to use – suitable Personal Protection Equipment should be worn. Shake can well and apply from a distance of 20 to 30 cm. Allow to dry for optimum shine. For reduced sheen, wipe with a soft cloth. Do not use on surfaces where slip would be hazardous, for example steering wheels or foot pedals. Dispose of used aerosols in line with local and national regulations.

*Image for illustrative purposes only

TYGRIS Electrical Cleaner is an alcohol based cleaning solvent designed for use in the electronics and switchgear industries and is suitable for cleaning most electrical apparatus. Safe to use with most plastics, it effectively cleans and degreases electrical contacts, circuit boards and print heads, leaving no residues.

Benefits:

• Powerful and effective cleaner;
• Removes stains – coatings – printing aids – oil – grease – dirt and most fluxes;
• Leaves no residue;
• Controlled drying time;
• Safe with most plastics and on delicate instruments;
• Does not cause corrosion of metals;
• Low toxicity

Consult the safety data sheet prior to use – suitable Personal Protection Equipment should be worn. Turn off electrical power. Shake can well before use and spray from a distance of 15-30cm. Evaporates quickly. Wipe off any excess. Avoid spraying near naked flames or hot surfaces. Turn off electrical equipment before applying spray. Dispose of used aerosols in line with local and national regulations.

*Image for illustrative purposes only

TYGRIS Engine Degreaser is a powerful, heavy duty emulsifiable solvent degreaser and de-waxer which simply sprays on and washes off, quickly removing oil, grease and tar deposits from engines and other surfaces.

Benefits:

• Use on any metallic surface;
• Removes grease tar stains oil bitumen waxes etc;
• Dissolves and emulsifies for easy removal;
• Can be used on most plastic and painted surfaces;
• Suitable for spot removal on concrete

Consult the safety data sheet prior to use – suitable Personal Protection Equipment should be worn. Shake can thoroughly before use and spray liberally on area to be cleaned. Allow to remain in contact for a few minutes, brushing to assist in penetration. Wash off with plenty of water. Not for use on asphalt. Dispose of used aerosols in line with local and national regulations.

*Image for illustrative purposes only

TYGRIS Graphite Penetrating Oil is designed for use in semi-hostile environments, lubricating in temperatures of up to 150 deg C and penetrating to free seized and corroded metallic components. The presence of micronized graphite particles provides extended lubrication intervals and is also useful for anti seize applications.

Benefits:

• Contains micronized graphite particles;
• Enhanced load bearing performance;
• Good anti-scuff properties;
• Higher temperature range than conventional oils;
• Excellent for freeing seized and corroded parts;
• Fast penetration of rust;
• Leaves a residual lubricating film;

Consult the safety data sheet prior to use – suitable Personal Protection Equipment should be worn. Shake can well before use. Spray directly onto component from a distance of 20 to 30cm. Allow to penetrate for a few minutes prior to disassembly. Heavier corrosion may require longer penetration time. Not for use on plastic substrates. Dispose of used aerosols in line with local and national regulations.

*Image for illustrative purposes only

PRECISION Looz-n-it Penetrating Oil is a premium release fluid providing a powerful penetrating action which releases and lubricates metal components which have seized through corrosion, remaining effective even under water. Giving effective penetration and lubrication without damaging paintwork, it also actively displaces moisture and does not dry off.

Benefits:

• Fast penetration of rust and corrosion deposits;
• Works effectively in wet and damp conditions;
• Repells water;
• Displaces moisture;
• Excellent lubrication properties;
• Cleans and degreases;

Consult the safety data sheet prior to use – suitable Personal Protection Equipment should be worn. For best results, clean the area of dirt, water and grime. Shake can well before use and spray directly onto component from a distance of 20 to 30cm, ensuring even coverage. Remove excess with a cloth. Heavily corroded components may require soaking. This Aerosol should be stored out of direct sunlight and below 50°C. Dispose of used aerosols in line with local and national regulations.

*Image for illustrative purposes only

TYGRIS Open Gear Lubricant is a bituminous reinforced heavy duty lubricant formulated to protect and lubricate exposed gears, wire ropes and other moving parts. Exceptional penetrating and water resistance properties make it ideal for situations where exposure to weather is experienced and its tenacity resists throwing off during use.

Benefits:

• Highly resistant to throw off;
• Water resistant for use in adverse weather conditions;
• Excellent lubricating power;
• High pressure foaming discharge imparts excellent penetrative power;
• Protects against corrosion – wear and salt;
• Resistant to embrittlement over long usage

Consult the safety data sheet prior to use – suitable Personal Protection Equipment should be worn. Shake can well before use. Spray onto stationary parts from 20 to 30cm. The directional nozzle assists in accurate application of the lubricant. Dispose of used aerosols in line with local and national regulations.

*Image for illustrative purposes only

PRECISION Electro Clean is a very fast evaporating solvent cleaner for use on electrical components, making maintenance quick and safe on switchgear, forklift electrics and where equipment will be used soon after this is carried out. Requiring no rinsing or cleaning off, grease and dirt are quickly and efficiently removed.

Benefits:

• Very fast evaporating;
• Efficient removal of grease and dirt;
• Requires no further processing;
• Safe to use on most plastics and painted surfaces

Consult the safety data sheet prior to use – suitable Personal Protection Equipment should be worn. Isolate electrical supply and remove sources of ignition. Shake can well. Spray cleaner onto contaminated area and wait for cleaner to evaporate. Wipe off if necessary. Ensure product has completely dried off before switching on electrical supply. Test plastics for compatibility. Dispose of used aerosols in line with local and national regulations.

*Image for illustrative purposes only

TYGRIS Silicone Lubricant provides clean, low odour, non-staining lubrication for many applications, especially plastic parts and seals.

Benefits:

• Excellent lubricating properties;
• Non-staining and low odour;
• Effective on plastic – metal – wood – vinyl – rubber and other surfaces;
• Used for mould release in the plastics industry;
• An effective surface polish;
• Use on seals – slides – bearings – textile equipment etc.;
• High temperature stability up to 200°C;
• Water repellent

Consult the safety data sheet prior to use – suitable Personal Protection Equipment should be worn. Shake can well before use. Spray onto surface from 20-30cm. Remove excess with a clean cloth. Should not be used on surfaces where subsequent re-finishing is to take place eg. painting, printing. Dispose of used aerosols in line with local and national regulations.

*Image for illustrative purposes only

Benefits:

*Image for illustrative purposes only

Benefits:

• Super Powerful Water Displacement Properties
• Leaves Behind A Protective Film To Guard Against Corrosion
• Rapid Penetrating Action For Seized Components

When it comes to freeing seized components and guarding them against corrosion, why settle for anything less than the best? We know how important it is to keep your operation running smoothly, and our superior WD anti rust agent that protects and lubricates does the job brilliantly.

This silicone-free aerosol makes tackling corrosion simple, even when you’re working with hard to reach areas. With cleaning, lubricating and degreasing properties, R213 is an all in one must-have for all your maintenance needs.

Driving out moisture from your components is essential maintenance, and R213 is a high-performance water displacement spray that gets to work quickly! Its rapid penetrating action releases seized components fast and leaves behind a fine film that helps to protect against further corrosion, reducing the amount of time spent on pricey upkeep.

This film does more than guard against rust, as it also works as an effective lubricant that lengthens component life. If dismantling equipment is a hassle then not to worry, this anti rust agent also helps to ease along the process, and even works as a cleaner. We offer a range of anti rust fluids, including our de-watering tool protector and food safe anti rust ideal for food and beverage processing environments. Why not browse our full range here?

Consult the safety data sheet prior to use – suitable Personal Protection Equipment should be worn. Shake can well before use. Spray onto area from 15-30cm. When used as a penetrant or for de-watering leave for a few minutes before continuing work. When applying as a protective coating allow to dry to form a film. Dispose of used aerosols in line with local and national regulations.

*Image for illustrative purposes only

TYGRIS Weld Spatter Release SB is a special non-silicone formulation ideal for use on all types of welding equipment to prevent the adhesion of welding spatter. It can be applied to workpieces, nozzles, shrouds, jigs and tools and enables free gas flow in inert gas welding.

Benefits:

• Non-silicone – can be used with products that require finishing;
• Rapid drying;
• Prevents adhesion – spatter easily removed;
• Colourless – non-staining;
• Does not gum up when subject to heat;
• Non-flammable for maximum safety;

Consult the safety data sheet prior to use – suitable Personal Protection Equipment should be worn. Shake can well before use. Hold can upright and spray a thin, just visible, even film from a distance of 30cm. Normal industrial degreasing methods will remove any residual film if necessary. Dispose of used aerosols in line with local and national regulations.

*Image for illustrative purposes only

TYGRIS White Grease with PTFE is a premium quality anhydrous calcium based grease for use in applications requiring good water resistance. For use in anti-friction and plain bearing pumping equipment and in the lubrication of linkages, door latches, hinges, gears, springs, bearings, rubber components, rings, striker plates and sliding shackles.

Benefits:

• High water resistance for marine use;
• Prevents corrosion in humid conditions;
• Prevention of seizure; Good mechanical stability;
• Reinforced with PTFE for improved slip properties;

Consult the safety data sheet prior to use – suitable Personal Protection Equipment should be worn. Shake can well before use. Spray from 20-30 cm (8-12ins). Leave for a few moments to thicken prior to assembly In an inaccessible area use the extension tube. Dispose of used aerosols in line with local and national regulations.

*Image for illustrative purposes only